Deutsch
ItalianoHead office Lindau (Lake Constance)
PCM-Reichl GmbHVon-Behring-Str. 3
88131 Lindau (Bodensee)
Projects all around Lake Constance – from Lindau via Friedrichshafen and Ravensburg to Bregenz.
Building services engineers · Allgäu & Lake Constance
Building services (MEP) planning for the Allgäu and Lake Constance – from Lindau and Memmingerberg
PCM-Reichl plans electrical systems, HVAC & plumbing and building automation across service phases 1–9 – model-based, coordinated across all trades, with two offices in the region: in Lindau on Lake Constance and in Memmingerberg near Memmingen.
Lindau (Lake Constance)
Memmingerberg (Allgäu)
project phases 1–9
HRB 18072 · AG Kempten
Locations
Two locations, short distances: Lindau on Lake Constance and Memmingerberg in the Allgäu
Building services (MEP) needs presence on the ground – during as-built surveys, in coordination meetings and on site. From Lake Constance we serve the four-country region around Lindau, Friedrichshafen and Bregenz; from the Allgäu, the economic regions of Memmingen, Kempten and Upper Swabia. Both offices work on the same digital model – one data set, one responsibility.
Von-Behring-Str. 3
88131 Lindau (Bodensee)
Memmingerberg office (Allgäu)
PCM-Reichl GmbHAllgäustraße 8b
87766 Memmingerberg
Projects in the Allgäu and Upper Swabia – from Memmingen via Kempten to Wangen im Allgäu.
Services in the region
Building services (MEP) in the region: electrical, HVAC & plumbing, building automation, site supervision
All building services trades from a single source – planned by project phases, coordinated in one model, with a cost structure to DIN 276.
Building services planning
Specialist planning of all trades across service phases 1–9: one model, one responsibility – from concept to acceptance.
Building services planning in detail →Electrical planning
Power systems and low-voltage & communications systems, safety lighting, lightning protection – electrical planning for industrial, commercial and residential projects on Lake Constance.
Electrical planning in the Allgäu & on Lake Constance →HVAC & plumbing planning
Heating, ventilation, cooling and plumbing as one coordinated system – energy-efficient for new builds and existing buildings in the Allgäu.
HVAC & plumbing planning in the region →Building automation & Controls
Building automation planning to VDI 3814: vendor-neutral from the function list to commissioning.
Controls (BMS) planning in the Allgäu →Site supervision (MEP)
Specialist site management for electrical, HVAC & plumbing and building automation controls in service phase 8 – including review of variations under VOB/B.
Site supervision in the region →3D laser scanning
As-built surveys by laser scan and scan-to-BIM: the reliable planning basis for refurbishments in the region – also without a design contract. More on MEP refurbishment.
Request an as-built survey →
Good question
Why appoint a building services (MEP) firm from the region?
Because proximity counts where building services are decided: during the as-built survey and on the construction site. A firm that is regularly on site in service phase 8 spots deviations before they are installed and reviews variations under VOB/B before they reach the budget. Add market knowledge: a firm from the region knows the authorities, utilities and installation contractors between Lake Constance and the Allgäu.
✓
Site presence in service phase 8 – quality is secured on site, not at the desk.
✓
A direct line: your enquiry is answered by the engineer who would plan your project.
✓
Coordination meetings at our office in Memmingerberg or on your construction site.
Specialist trades
Electrical and Controls (BMS) planning in the Allgäu – specialist trades on the ground
Electrical systems and building automation increasingly determine a building’s performance and operating costs – and are at the same time among the scarcest planning disciplines on the market. PCM-Reichl plans both trades in-house: electrical systems to the relevant DIN VDE standards, building automation and controls technology to VDI 3814 – vendor-neutral, with open protocols such as BACnet, KNX and Modbus.
Because data points, cable routes and control cabinets come from the same model, the interfaces between the trades remain in one pair of hands – from the building automation function list to commissioning.
VDI 3814
DIN VDE
BACnet
KNX
Modbus
Industry & commerce
Building services (MEP) for industry and commerce between Memmingen, Kempten and Ravensburg
The economic region between Memmingen, Kempten, Wangen im Allgäu and Ravensburg is shaped by manufacturing SMEs – with production halls, logistics space and a building stock that has grown over time. This is exactly where building services determine security of supply, energy costs and the capacity to expand.
For existing buildings without reliable documentation, we capture the installations ourselves by 3D laser scan and model them into an as-built BIM model – the basis for refurbishment and extension during ongoing operations. We structure cost planning to DIN 276; tendering is based on reliable quantities from the verified model.
Vorarlberg & Eastern Switzerland
Building services engineering for Vorarlberg and Eastern Switzerland
Our head office in Lindau sits right on the border – Bregenz, Dornbirn and the Rhine Valley are close by, as is Eastern Switzerland around St. Gallen. For clients, architects and general planners there, we plan all building services from a single source: electrical engineering, heating, ventilation, air conditioning and plumbing, and building automation.
✓
Design to Austrian and Swiss standards (ÖNORM, OIB guidelines and SIA), coordinated with local authorities and contractors.
✓
For existing buildings, a 3D laser scan first on request, then all trades in one coordinated BIM model – both in-house.
✓
Meetings on site and specialist site management on the construction site – in day-to-day project work, the border is invisible.
Service area
Which regions does PCM-Reichl cover?
Our core area covers the Lake Constance region and the Allgäu: Lindau, Friedrichshafen, Ravensburg, Wangen im Allgäu, Memmingen, Kempten and neighbouring Upper Swabia. Thanks to our border location on Lake Constance, we also take on projects in nearby Vorarlberg, for example in Bregenz or Dornbirn. Depending on the project, we work throughout Germany, in Austria and Switzerland, and internationally – model-based, digital project delivery makes collaboration independent of location.
How does working together start?
With an initial consultation – by phone, on your construction site or at our office in Memmingerberg. You outline your project; we clarify scope, interfaces and timeline. You then receive a proposal with clearly delineated service phases.
Does PCM-Reichl work with architects and general planners?
Yes. A large share of our work is specialist planning in teams with architects and general planners. We deliver coordinated trade models in open formats (IFC/BCF) and clear responsibilities at every interface.
Does PCM-Reichl also take on partial scopes – for example only service phase 8?
Yes. We also take on site supervision and specialist site management for building services as a stand-alone mandate for third-party designs – as well as individual service phases, as-built surveys by 3D laser scan or MEP coordination.
Projects
Project experience by building type
What we have worked on – summarised by building type and our role. We do not name our clients, locations or project details.
Pharma, cleanroom & GMP · electrical design, MEP coordination, project management and site supervision
Pools & thermal baths · electrical design incl. lighting design – new builds and refurbishment during operation
Universities & education · electrical design with BIM
Industry, commercial & office buildings · design, project management and MEP coordination
Discuss your project →
Your contact
Patrick Reichl
Founder & Managing Director · PCM-Reichl GmbH
Write to office@pcm-reichl.com – we will pass your enquiry straight on to Patrick Reichl.
Directions & contact
Directions and contact: Von-Behring-Str. 3 Lindau · Allgäustraße 8b Memmingerberg
Appointments by arrangement at our office in Memmingerberg; Lindau is our registered office.
Head office Lindau
PCM-Reichl GmbHVon-Behring-Str. 3
88131 Lindau (Bodensee)
Memmingerberg office
PCM-Reichl GmbHAllgäustraße 8b
87766 Memmingerberg
Direct contact
Phone: +49 173 6959138
Email: office@pcm-reichl.com
Let’s talk about your building services project in the region.
PCM-Reichl GmbH · Building services (MEP) engineering firm · Lindau (Lake Constance) · Memmingerberg (Allgäu) · HRB 18072, Amtsgericht Kempten
